Mediatek Usb Vcom Drivers – Fixing "This Device Cannot Start (Code 10)" Error

Introduction

Mediatek USB VCOM Drivers are essential for MediaTek-powered Android devices to communicate with a computer. Without these drivers, you won’t be able to transfer files or flash custom ROMs. However, sometimes you may encounter an error message that says “This Device Cannot Start (Code 10).” This can be frustrating, but don’t worry, we’ve got you covered. In this article, we’ll show you how to fix this error and get your device up and running.

What is the “This Device Cannot Start (Code 10)” Error?

The “This Device Cannot Start (Code 10)” error is a common problem that occurs when a device fails to start. It can happen for many reasons, such as outdated drivers, corrupted files, or hardware issues. In the case of Mediatek USB VCOM Drivers, the error usually occurs when the drivers are not installed correctly or are outdated.

Step 1: Check Your Drivers

The first thing you need to do is check whether your drivers are up to date. You can do this by going to the Device Manager in Windows. To access the Device Manager, follow these steps:

1. Press the Windows key + X and select Device Manager.
2. Expand the “Ports (COM & LPT)” category.
3. Right-click on “Mediatek PreLoader USB VCOM Port (COM X)” and select Properties.
4. Click on the Driver tab and then click on Update Driver.

Step 2: Install the Latest Drivers

If your drivers are outdated, you need to install the latest version. You can download the latest drivers from the Mediatek website. Follow these steps to install the drivers:

1. Download and extract the drivers to a folder on your computer.
2. Open the Device Manager and right-click on “Mediatek PreLoader USB VCOM Port (COM X)”.
3. Select Update Driver and then click on “Browse my computer for driver software”.
4. Select the folder where you extracted the drivers and click on Next.
5. Follow the on-screen instructions to complete the installation process.

Step 3: Restart Your Computer

After installing the drivers, you need to restart your computer. This will ensure that the drivers are properly installed and the changes take effect. Once your computer has restarted, connect your device to the computer and check if the error has been resolved.

Step 4: Check Your USB Cable

If the error persists, you may need to check your USB cable. Sometimes, a faulty or damaged USB cable can cause the “This Device Cannot Start (Code 10)” error. Try using a different USB cable and see if the error goes away.

Step 5: Try a Different USB Port

If the USB cable is not the issue, you may need to try a different USB port. Sometimes, a USB port can become damaged or stop working properly. Try connecting your device to a different USB port and see if the error goes away.

Step 6: Reinstall the Drivers

If none of the above steps work, you may need to reinstall the drivers. Follow these steps to reinstall the drivers:

1. Open the Device Manager and right-click on “Mediatek PreLoader USB VCOM Port (COM X)”.
2. Select Uninstall and then click on Delete the driver software for this device.
3. Disconnect your device from the computer and restart your computer.
4. Download and install the latest drivers from the Mediatek website.
5. Connect your device to the computer and check if the error has been resolved.

Conclusion

The “This Device Cannot Start (Code 10)” error can be frustrating, but it’s not the end of the world. By following the steps outlined in this article, you can fix the error and get your device up and running. Remember to always keep your drivers up to date and use a good quality USB cable to avoid any issues in the future.